D-Link xStack DGS-3420 Series - Page 665

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
660
Parameters
vlan - (Optional) Specify the name of the VLAN for which to view the MLD snooping configuration.
<vlan_name 32> - Specify the name of the VLAN. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN for which to view the MLD snooping configuration.
<vlanid_list> - Specify a list of VLAN IDs.
Note: If no parameter is specified, the system will display all current MLD snooping
configurations.
Restrictions
None.
Example
To display MLD snooping:
DGS-3420-28SC:admin#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Disabled
Data Driven Learning Max Entries : 120
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : ::
Querier Expiry Time : 0 secs
State : Disabled
Fast Done : Disabled
Rate Limit(pkt/sec) : No Limitation
Proxy Reporting : Disabled
Proxy Reporting Source IP : ::
Version : 2
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3420-28SC:admin#