D-Link xStack DGS-3420 Series - Page 667

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
662
DGS-3420-28SC:admin#show mld_snooping group
Command: show mld_snooping group
Source/Group : 2001::1/FF1E::1
VLAN Name/VID :default/1
Member Ports : 1-2
UP Time : 26
Expiry Time : 258
Filter Mode : INCLUDE
Source/Group : 2002::2/FF1E::1
VLAN Name/VID: : default/1
Member Ports : 3
UP Time : 29
Expiry Time : 247
Filter Mode : EXCLUDE
Source/Group : NULL/FF1E::2
VLAN Name/VID : default/1
Member Ports : 4-5
UP Time : 40
Expiry Time : 205
Filter Mode : EXCLUDE
Total Entries : 3
DGS-3420-28SC:admin#
58-17 show mld_snooping mrouter_ports
Description
This command is used to display the router ports on the switch.
Format
show mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static |
dynamic | forbidden]}
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Specify the name of the VLAN on which the router port resides. The maximum
length is 32 characters.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Specify a list of VLAN IDs.
all - Specify all VLANs on which the router port resides.
static - (Optional) Display router ports that have been statically configured.
dynamic - (Optional) Display router ports that have been dynamically learned.
forbidden - (Optional) Display forbidden router ports that have been statically configured.