D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
683
default - Specify the command to return the command prompt to its original factory default value.
Restrictions
When users issue the “reset” command, the current command prompt will remain in tact. Issuing the
“reset system” will return the command prompt to its original factory default value.
Only Administrator and Operator-level users can issue this command.
Example
To edit the command prompt:
DGS-3420-28SC:admin#config command_prompt HQ0001
Command: config command_prompt HQ0001
Success.
HQ0001:admin#