D-Link xStack DGS-3420 Series - Page 699

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
694
Parameters
<ipaddr> - Specify the IP address of the trusted host.
<ipv6addr> - Specify the IPv6 address of the trusted host.
network - Specify the network address of the trusted network. The form of network address is
xxx.xxx.xxx.xxx/y.
<network_address> - Specify the network address of the trusted network. The form of network
address is xxx.xxx.xxx.xxx/y.
ipv6_prefix - Specify the IPv6 network address of the trusted network.
<ipv6networkaddr> - Specify the IPv6 network address of the trusted network.
add - Allow to manage applications for a trusted host.
delete - Prevent from managing applications for a trusted host.
snmp - (Optional) Specify the trusted host for SNMP.
telnet - (Optional) Specify the trusted host for Telnet.
ssh - (Optional) Specify the trusted host for SSH.
http - (Optional) Specify the trusted host for HTTP.
https - (Optional) Specify the trusted host for HTTPs.
ping - (Optional) Specify the trusted host for Ping.
all - Specify the trusted host for all applications.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the trusted host:
DGS-3420-28SC:admin#config trusted_host 10.48.74.121 add ssh telnet
Command: config trusted_host 10.48.74.121 add ssh telnet
Success.
DGS-3420-28SC:admin#
62-6 delete trusted_host
Description
This command is used to delete a trusted host entry.
Format
delete trusted_host [ipaddr <ipaddr> | ipv6address <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr> | all]
Parameters
ipaddr - Specify the IP address of the trusted host.
<ipaddr> - Specify the IP address of the trusted host.
ipv6address - Specify the IPv6 address of the trusted host.