D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
695
<ipv6addr> - Specify the IPv6 address of the trusted host.
network - Specify the network address of the trusted network. The form of network address is
xxx.xxx.xxx.xxx/y.
<network_address> - Specify the network address of the trusted network. The form of network
address is xxx.xxx.xxx.xxx/y.
ipv6_prefix - Specify the IPv6 network address of the trusted network.
<ipv6networkaddr> - Specify the IPv6 network address of the trusted network.
all - Specify that all trusted hosts will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a trusted host:
DGS-3420-28SC:admin#delete trusted_host ipaddr 10.48.74.121
Command: delete trusted_host ipaddr 10.48.74.121
Success.
DGS-3420-28SC:admin#
62-7 show trusted_host
Description
This command is used to display the trusted hosts.
Format
show trusted_host
Parameters
None.
Restrictions
None.
Example
To display trusted hosts:
DGS-3420-28SC:admin#show trusted_host
Command: show trusted_host

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English