D-Link xStack DGS-3420 Series - Page 732

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
727
Restrictions
None.
Example
To display the switch’s attack log:
DGS-3420-28SC:admin#show attack_log index 1-3
Command: show attack_log index 1-3
Index Date Time Level Log Text
----- ---------- -------- -------- --------------------------------------------
--
3 2009-12-26 14:15:45 WARN(4) Port security violation mac addrss 00-18-
F3-10-94-89 on locking address full port 28
2 2009-12-26 14:15:45 WARN(4) Port security violation mac addrss 00-18-
F3-10-94-89 on locking address full port 28
1 2009-12-26 14:15:45 WARN(4) Port security violation mac addrss 00-18-
F3-10-94-89 on locking address full port 28
DGS-3420-28SC:admin#
63-22 clear attack_log
Description
This command is used to clear the switch’s attack log.
Format
clear attack_log
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the switch’s attack log:
DGS-3420-28SC:admin#clear attack_log
Command: clear attack_log
Success.