D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
769
70-6 config led state
Description
This command is used to configure the LED admin state of all ports. When the port LED admin state is
disabled, the LEDs of all ports are turned off. If the port LED admin state is enabled, the port LEDs are
controlled by the ports' link status.
Format
config led state [enable | disable]
Parameters
enable - Specify to enable the LED admin state of all ports.
disable - Specify to disable the LED admin state of all ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the LED admin state:
DGS-3420-28SC:admin#config led state disable
Command: config led state disable
Success.
DGS-3420-28SC:admin#
70-7 show led
Description
This command is used to display the setting of all port’s LED admin state.
Format
show led
Parameters
None.
Restrictions
None.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English