xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
781
3-5 show ptp clock
Description
This command is used to display the active attributes of the PTP clock.
Format
show ptp clock
Parameters
None.
Restrictions
None.
Example
To show the active attributes of the boundary clock:
DGS-3420-28SC:admin# show ptp clock
Command: show ptp clock
PTP State : Enabled
PTP Clock Mode : Boundary Clock
PTP Transport Protocol : UDP
PTP Clock Domain Number : 1
PTP Clock Domain Name : internal_domain
PTP Clock Identity : ACDE48FFFE6789AB
PTP Priority 1 : 128
PTP Priority 2 : 128
PTP Clock Class : 187
PTP Steps Removed : 2
PTP Last Offset : +130ns
PTP Mean Path Delay : 1 second
PTP Enabled Ports : 1:1-1:4, 2:1-2:4
To show the properties of the Peer-to-Peer transparent clock:
To Next Page
Loading...
