xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
780
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the pdelay_req_interval attribute of all the PTP ports to 4 seconds:
DGS-3420-28SC:admin# config ptp p2p_transparent ports all pdelay_req_interval 4
Command: config ptp p2p_transparent ports all pdelay_req_interval 4
Success.
3-4 show ptp
Description
This command is used to display the configured attributes of PTP on the switch.
Format
show ptp
Parameters
None.
Restrictions
None.
Example
To show the global PTP configuration:
DGS-3420-28SC:admin# show ptp
Command: show ptp
PTP State Setting : Enabled
PTP Mode Setting : Boundary Clock
PTP Transport Protocol Setting : UDP
PTP Clock Domain Number Setting : 0
PTP Clock Domain Name Setting : Internal Domain
To Next Page
Loading...
