D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
806
Restrictions
None.
Example
To display the 802.1p user priority:
DGS-3420-28SC:admin#show 802.1p user_priority
Command: show 802.1p user_priority
QoS Class of Traffic
Port 1
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
Port 2
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DGS-3420-28SC:admin#
5-11 config 802.1p default_priority
Description
This command is used to specify default priority for untagged packets received on a port of the switch.
Format
config 802.1p default_priority [<portlist> | all ] <priority 0-7>
Parameters
<portlist> - Specify a range of ports for which the default priority is to be configured. That is, a range
of ports for which all untagged packets received will be assigned the priority specified below. The