D-Link xStack DGS-3420 Series - Page 900

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
895
DGS-3420-28SC:admin# disable community_encryption
Command: disable community_encryption
Success.
DGS-3420-28SC:admin#
15-22 show community_encryption
Description
This command is used to display the encryption state on the SNMP community string.
Format
show community_encryption
Parameters
None.
Restrictions
None.
Example
To show the encryption state on the SNMP community string:
DGS-3420-28SC:admin# show community_encryption
Command: show community_encryption
SNMP Community Encryption State : Enabled
DGS-3420-28SC:admin#
15-23 enable snmp response_broadcast_request
Description
This command is used to enable response broadcast requests.
Format
enable snmp response_broadcast_request