TDR9000
™
Circuit Breaker Test System User’s Guide
72A-1898 Rev. A 11/01 4-93
Monday, November 26, 2001 1:09 pm
Use phase encoded signal colors
Enables the automatic encoding of phases in the
display, as shown in Table 4.10.
If more than four Test Results are displayed, this
feature automatically turns off. The result is that all
channels from a given circuit breaker become the
same color. It is assumed that with five or more
circuit breakers, a comparison of channels among
different circuit breakers is more necessary than a
comparison of different channels associated with
the same circuit breaker.
Automatically overlay signals with the same name
Overlays similar channels automatically.
Table 4.10 Phase Encoded Signal Colors
Test Result In Frame Phase Color
First Phase A Red
Phase B Yellow
Phase C Blue
Second Phase A Purple Bright
Phase B Green
Phase C Bright Light Blue
Third Phase A Brown
Phase B Olive Green
Phase C Purple Medium Dark
Fourth Phase A Black
Phase B Green Flat
Phase C Blue Flat
To Next Page
Loading...
