72A-1898 Rev. A 11/01 I-1
Monday, November 26, 2001 1:09 pm
Index
A
ABB AHMA 4/8 Transducer I-11
Adjustable Wheel Probe 4-63
Adjusting Test Results 4-85
Air-Blast Circuit Breakers, operation A-5
Air-Magnetic Circuit Breakers, operation A-2
Analog and Auxiliary Setup, general 1-13
Analog Channel Activation A-68
Analog channel connections 4-62
Analog Channel Specifications A-67
Analog Current/Voltage Magnitude A-40
AUX Contact Transition A-42
Auxiliary channel connections 4-62
Auxiliary Contact Channel Specifications A-66
Auxiliary Contacts Channel Activation A-67
Auxiliary Wet/Dry Contact Monitor I-29
Average Velocity – Open A-86
Average Velocity Specifications A-86
B
Backplane Board Registration Errors B-9
Backplane slots 3-13
C
Cable replacement B-30
Cable-In Bits Failure B-9
Capacitance Channel Parameters A-66
Capacitance Test Errors 4-77
Capacitance test, explained 2-18
Channel activation check 4-32
Channel types, operational
Analog D-3
Auxiliary D-2
Main Contact timing D-1
Motion D-2
Pre-insertion resistor D-2
Channel Viewing Properties 4-91
Circuit board replacement B-19
To Next Page
Loading...
