ETAS ES800 - Page 45

45 | ES820.1 Drive Recorder
ETAS ES800 System | User Guide
"Shutdown" Events (change from "Passive on" to "Low power
standby")
"Shutdown" Events (change from "Passive on" to "Fast boot
standby")
"Shutdown" Events (change from "Measurement" to "Fast boot
standby")
"Shutdown" Events (change from "Measurement" to "Active on")
"Shutdown" Events (change from "Measurement" to "Passive on")
Event Abbrevia-
tion
Description
No. in
Fig. 5-5
13 No communication at the "ETH" interface (PC or measuring
module)
Event Abbrevia-
tion
Description
No. in
Fig. 5-5
13 No communication at the "ETH" interface (PC or measuring
module)
Event Abbrevia-
tion
Description
No. in
Fig. 5-5
8 Auto Measurement ended, no further tasks
Event Abbrevia-
tion
Description
No. in
Fig. 5-5
16 Measurement ended normally
Event Abbrevia-
tion
Description
No. in
Fig. 5-5
8 Auto Measurement ended, no further tasks