Fagor CNC 8055 T - Page 207

Operating manual
CNC 8055
CNC 8055i
GRAPHIC EDITOR
11.
·T· MODEL
SOFT: V02.2X
·207·
Graphic elements
"FILLED CIRCLE" softkey
To draw a filled circle, follow the steps indicated in the "CIRCLE" option.
Once the circle has been defined, the CNC will fill it with the color used to define it.
"FILLED RECTANGLE" softkey
To draw a filled polygon, follow the steps indicated in the "RECTANGLE" option.
Once the rectangle has been defined, the CNC will fill it with the color used to define it.