196
STATUS :FPGA IN :v01-00 OUT :v01-00 : 3/5
VERSION :(MU) ME :v01-00 MV :v01-00 :
STATUS :FPGA DVE1:v01-00 DVE2:v01-00 : 4/5
VERSION :(MU) DSK :v01-00 :
STATUS :FPGA CPU1:v01-00 CPU2:v01-00 : 5/5
VERSION :(OU) CNFG:v01-00 :
Item Description
SOFT MU HVS-350HS Software version of HVS-350HS.
SOFT OU HVS-35OU/ROU Software version of HVS-35OU/35ROU.
SOFT RU1-2 HVS-30RU Software version of HVS-30RU.
FPGA (MU) CNFG HVS-350HS CPLD firmware version of CPU card
FPGA (MU) CPU HVS-350HS FPGA firmware version of CPU card
FPGA (MU) SDI1-2 HVS-350HS FPGA firmware version of SDI1-2 cards
FPGA (MU) IN HVS-350HS FPGA firmware version of IN card
FPGA (MU) OUT HVS-350HS FPGA firmware version of Out card
FPGA (MU) ME HVS-350HS FPGA firmware version of ME card
FPGA (MU) MV HVS-350HS FPGA firmware version of MV card
FPGA (MU) DVE1-2 HVS-350HS FPGA firmware version of DVE1-2 cards
FPGA (MU) DSK HVS-350HS FPGA firmware version of DSK card
FPGA (OU) CPU1-2 HVS-35OU/ROU FPGA1-2 firmware versions
FPGA (OU) CNFG HVS-35OU/ROU CPLD firmware version
30-3. Installed Options
To check the options installed to the switcher, open the [SETUP-STATUS-OPTION] menu. The
menu shows the hardware and software option installed to the switcher as shown below.
STATUS :SLOT-A >HVS-30HSDI :v01-00 : 1/5
OPTION :SLOT-B >HVS-30HSAI :v01-00 :
STATUS :SLOT-C >HVS-30PCIN :v01-00 : 2/5
OPTION :SLOT-D >HVS-30HSDI-A:v01-00 :
STATUS :SLOT-E >HVS-30HSDO :v01-00 : 3/5
OPTION :SLOT-F >HVS-30PCO :v01-00 :
STATUS :HVS-35ED >INSTALLED : 4/5
OPTION :HVS-35VR >INSTALLED :
STATUS :HVS-35S3D>INSTALLED : 5/5
OPTION :
To Next Page
Loading...
