About the configuration for HVS-350 series system
The main unit for the HVS-350 series is HVS-350HS. The following standard methods for
operation are available. (HVS-30OU and HVS-30RU can also be used.) These control
methods can exist together in the same system.
HVS-35OU: A full-featured standard control panel.
HVS-35ROU: A compact type control panel
HVS-35GUI: Control software installed in the computer.
Other Options
ITEM QTY REMARKS
HVS-30RU 1-2 Remote Control Unit
HVS-AUX8 1-5 AUX bus Control Box (Hanabi Series Option)
HVS-AUX16 1-5 AUX bus Control Box (Hanabi Series Option)
HVS-AUX32 1-5 AUX bus Control Box (Hanabi Series Option)
HVS-AUX8RK,
HVS-AUXRK
1
Remote Kit for Aux bus Control Box
(Hanabi Series Option)
HVS-TALR20/32 (*1) 1-3
Tally Control Unit (Relay type)
(Hanabi Series Option)
HVS-TALOC20/32
(*1)
1-3
Tally Control Unit (Open Collector type)
(Hanabi Series Option)
Control Cable 1
BNC cable for ARCNET connection (10m) , (BNC 5C2V
75Ω)
HVS-35VR 1 Virtual Link Option (Software)
(*1) Multiple HVS-TALOC / HVS-TALR configurations possible; up to 3 units max.
Optional devices or software are basically provided with the installation manuals (except
factory- installed ones) or specific operation manuals.
Check
Check to ensure no damage has occurred during shipment. If damage has occurred, or items
are missing, inform your supplier immediately.
Rack Mounting
The product can be mounted to EIA standard rack units. When rack mounting a unit, remove the
rubber feet and use the accessory rack mount brackets (rack ears).