Upon Receipt
Unpacking
The Hanabi Series switchers and their accessories are fully inspected and adjusted prior to
shipment. Operation can be performed immediately upon completing all required connections
and operational settings. Check your received items against the packing lists below.
HVS-350HS Box
ITEM QTY REMARKS
HVS-350HS 1 Main unit
AC Cord 1 set Retaining clips included
Rack Mount Brackets 1 set EIA standard type
Operation Manual 1 (This manual)
Options
HVS-30HSDI-A 1-4 HS/SD SDI 4-Input Expansion Card (Max. 4 cards)
HVS-30HSDI 1-4 HS/SD SDI 4-Input Expansion Card (Max. 4 cards)
HVS-30HSDO 1-2 HS/SD SDI 3-Output Expansion Card (Max. 2 cards)
HVS-30HSAI 1-4 HS/SD Analog 2-Input Expansion Card (Max. 4 cards)
HVS-30HSAO 1-2 HS/SD Analog 2-Output Expansion Card (Max. 2 cards)
HVS-30PCIN 1-4
Digital/Analog RGB 2-Input Expansion Card
(Max.4 cards)
HVS-30PCO 1-2
Digital/Analog RGB 2-Output Expansion Card
(Max. 2 cards)
HVS-30TALR 1-2
Tally Output Expansion Card (Relay type, Max. 2 cards),
37-pin D-sub connector (1 set, for cable fabrication)
HVS-35ED 1 Editor control option (software option)
HVS-35PSM 1 Redundant Power Supply Unit for HVS-350HS
* Up to four input cards of HVS-30HSDI-A/HSDI/HSAI/PCIN can be installed.
* Up to two output cards of HVS-30HSDO/HSAO/PCO can be installed..
HVS-35OU Box
ITEM QTY REMARKS
HVS-35OU 1 Operation Unit (20-button type)
HVS-35PSO 1 Redundant Power Supply Unit
Control Cable 1 BNC cable for ARCNET connection (10m)
AC Cord 1 set Power cord with retaining clips
Rack Mount Brackets 1 set Optional
HVS-35ROU Box
ITEM QTY REMARKS
HVS-35ROU 1 Operation Unit (12-button type)
HVS-35PSO 1 Redundant Power Supply Unit
Control Cable 1 BNC cable for ARCNET connection (10m)
AC Cord 1 set Power cord with retaining clips
Rack Mount Brackets 1 set Optional