Appendix 1 - 1
Appendix 1. Available File List
Available files for saving and loading (via USB flash memory or Ethernet connection)
File Extension File Name (*1) File Data Description
all DATA.all System data, all wipe data and all event memory data
sys HVS350.sys System data
mem EVENT.mem All event memory data
jpg (*2) SEQDAT**.seq Each sequence data
*.jpg JPEG files (standard RGB),
JPEG sequential files
STILL1.jpg to STILL4.jpg Stored still in JPEG format
tga (*2) *.tga TARGA files (uncompressed RGB),
TARGA sequential files
STILL1.tga to STILL4.tga Stored still in TARGA format
bmp (*2) *.bmp BITMAP files (uncompressed RGB)
BITMAP sequential files
STILL1.bmp to STILL4.bmp Stored still in BITMAP format
Note that file names are limited to max. 8 characters in length (ASCII code).
(*1) The files are automatically named to the correct name as shown in the table above when saving to
USB flash memory.
(*2) When loading a jpeg, targa or bitmap file from USB flash memory, you can select a centered or
tiled format as well as a normal one. In this case, a centered or tiled format image file is saved to
STILL as a jpg, tga or bmp file.
Available files for loading (via USB flash memory or Ethernet connection)
File Format File Name File Data Description
mcb XXXXXXXX.mcb HVS-350HS upgrade data
ocd XXXXXXXX.ocd HVS-35OU/HVS-35ROU upgrade data
mfb XXXXXXXX.mfb HVS-350HS FPGA firmware upgrade data
ofb XXXXXXXX.ofb HVS-35OU FPGA firmware upgrade data
Available USB flash memory devices
Manufacturer Series Name Model Name (Tested memory)
SanDisk Cruzer micro, Cruzer mini Series SDCZ2-256
I/O DATA TB-ST Series ToteBag
Transcend JetFlash150 Series
TOSHIBA TransMemory Series U2B-256MT
To Next Page
