Scanning 222
After you configured settings, go to "Sending the Scanned File to the Network" on page 226.
4 Server Port Number Enter the port number. If you are unsure, you can enter the default
value of 139 for SMB and 21 for FTP.
5 Login Name Enter the user account name that has access to the shared folder on
your computer or FTP server.
6 Login Password Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Computer feature.
Ensure that you have a valid password for the user login account.
(See "Confirming a Login name and Password" on page 205 for
details on how to add a password in your user login account.)
7 Re-enter Password Re-enter your password.
8 Share Name For Computer (SMB) only.
On the Windows operating system, enter the share name of the folder
to store the scanned document on the recipient computer.
On the Mac OS, enter the folder name to store the scanned document
on the recipient computer.
9 Server Path For Computer (SMB)
To store the scanned document in the shared folder directly without
creating any subfolder, leave the space blank.
To store the scanned document in the folder you created under the
shared folder, enter the path as following.
Example: Share Folder name, MyShare, Second-level folder name:
MyPic, Third-level folder name: John
You should now see MyShare\Mypic\John in your directory.
In this case, enter the following item.
Server Path: \MyPic\John
For Server (FTP)
Enter the server path to store the scanned document.
MyShare (Share folder)
MyPic
John
To Next Page
Loading...
