GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 6-1 - Overview 6-1
Chapter 6
Service Adjustments
Section 6-1
Overview
6-1-1 Purpose of this chapter 6
This section describes how to test and adjust the scanner. These tests are optional. You may use them
to check the system for errors.
Section 6-2
Regulatory
Verify, where applicable, that any regulatory information or tests required by national law are present
and accounted for, and any regulatory tests required by national law are performed
and documented.
Table 6-1 Contents in chapter
Section Description Page Number
6-1 Overview 6-1
6-2 Regulatory 6-1
6-3 Monitor Adjustments 6-2

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%