GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
8-218 Section 8-7 - Mechanical Option Installation instruction
8-7-20 BT11 Drawer Option Installation
1.) This section describes the installation procedure of the drawer option.
2.) Assemble the BW PRINTER to DRAWER FIX BRKT with screwing 4 screws (2306562, FH M3X6).
3.) Assemble the BT11 DRAWER to DRAWER FIX BRKT using 2 hooks.
Figure 8-332 BT11 Drawer Option Installation
Figure 8-333 BT11 Drawer Option Installation

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%