GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
3-16 Section 3-6 - System Configuration
Section 3-6
System Configuration
3-6-1 System Specifications
3-6-1-1 System Settings
1.) Press Insert key on the A/N keyboard to enter the utility menu.
2.) Select
Utility > System > General.
3.) Set the Hospital name, Department, Date and Time, Language, and Units.
4.) Click on Exit to terminate the utility function.
Table 3-1 System Configuration
Configuration Category Description
Settings
Enables the user or service personnel to set the
date, time, unit, language, basic information about
the organization such as the institution name and
department.
Figure 3-12 Setting Display
To Next Page
Loading...
