GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 7-7 - Trouble Shooting Tree 7-33
7-7-8 Printer Troubleshooting
Figure 7-19 Printer Troubleshooting
Unable to use Printer(s)!
Check that all signal, and power
supply cable connections between
Printer and Scanner are OK.
YES
NO
Is the printer(s) properly
connected?
Are there print papers left?
Insert the printer papers.
NO
YES
Is proper configuration for
the Print key(s) set?
Configure the Print key(s).
NO
See next page.

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%