GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
8-58 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-19 Middle Cover
8-2-19-1 Tools
• Common pilIips screwdrivers
• Stubby screwdriver (Flat tip and Cross tip)
8-2-19-2 Preparations
• Shut down the system and switch off the main breaker.
8-2-19-3 Removal procedure
1.) Remove the Left, and Right side covers. Refer to the 8-2-15 "Side Left Cover" on page 8-51 and 8-
2-16 "Side Right Cover" on page 8-52. And Remove the Rear Cover. Refer to the 8-2-18 "Rear
Cover" on page 8-55.
2.) Remove 2 rubber caps (1-2) from the middle cover of the system.
3.) Unscrew 2 screws (1-2) from the middle cover.
Figure 8-93 2 rubber cap of middle cover
Figure 8-94 2 screws of middle cover
1
2
12

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%