GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 6-3 - Monitor Adjustments 6-5
6-3-3-2 Removal procedure (cont’d)
4.) Perform the following functional tests. If all are successful, include the debrief script provided below.
6-3-3-3 Mounting Procedure
1.) Install the LCD monitor cover parts in the reverse order of removal procedure. Refer to the 8-2-2
"Monitor cover set" on page 8-5.
2.) Put the label on the rear of the LCD monitor.
Table 6-2 Functional Tests
Service Manual
Section
Functional Test / Diagnostic Test Debrief Script
4-3-1
Power On/Boot Up
“Service Manual, Direction
5394141, Rev 2+, 6-3-3. Equipment passed all
required tests and is ready for use. “
4-3-2
Power Off / Shutdown
4-8-2
LCD plastic filter Function Validation
Procedure
10-5-5
Physical Inspection
Figure 6-5 Putting the label on the rear of the LCD monitor
To Next Page
Loading...
