GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
8-162 Section 8-4 - Software Installation
8-4-4-10 Product Type Check of the System
To verify that the correct version of Application software was installed, check the Product Type of the
Application software. Verification steps are listed below.
1.) Turn on the system. Wait until the screen comes up.
2.) Press the
Utility key and click Admin tab.
3.) Check the value of
Product item.
4.) The following table is the matching table.
Figure 8-224 Checking Product Type
Installed Application Value of Product item
P5 Radiology.Arirang
A5 Radiology.Arirang.BW
A5Pro (A5 w/o PW) Radiology.Arirang.BW2
Table 8-59 Product Type Matching Table

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%