GE MAC 5 A4 User Manual

Work with the Files List
To transmit the report(s) ... Perform the following:
To another configured
destination
1. Select anywhere around the ellipsis icon on the lower, left-
side of the screen to expand the Transmit menu.
2. From the expanded Transmit menu, select any configured
destination to transmit the patient report(s).
3. Select the Transmit icon:
One or more destinations must be configured for the Transmit
icon to be enabled. If no destinations are configured, the
Transmit icon is disabled.
The selected patient reports are added to the Queue, processed and transmitted
to the selected destination. The Job Status can be viewed in the Queue. See
Display the Report Queue on page 121.
If you select patient reports for transmission from the expanded Files list, the
message displays on the notification area in the lower, right-side of the screen:
<Count> reports added to the queue, where <Count> is the number of selected
reports.
If you select patient reports for transmission from the collapsed Files list, the
message displays on the notification area in the lower, right-side of the screen:
<Destination_Name>: <Job_Status>.
For example, if the destination name is USB, and the job status is Failed, the
status displays as follows: USB: Failed.
A tick mark displays in the Sent column of the Files expanded list for patient
reports successfully transmitted to the default destination.
If Then
The transmission queue has reached its
maximum limit of 1,000 reports, a message
displays in the notification area that the
transmission queue is full and no additional
reports can be added.
Wait for the reports in the queue to transmit
and try again.
One or more patient reports have been
transmitted to the selected destination, a
message displays in the notification asking
you to confirm if you want to re-transmit the
already transmitted reports.
Perform one of the actions below:
• Select OK to re-transmit the patient
report.
• Select Cancel to cancel the report
transmission.
5864335-001-1  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 113

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English