GE MAC 5 A4

Login and Security
If you log off before a task is completed, a message displays that you will lose
incomplete data.
3. Perform one of these steps:
• If you have unsaved data, select Cancel.
• If you want to log off, select Log Out.
You are logged off your user session.
Change the User Password
This procedure applies only to the Admin user and local users. LDAP users must
change their password externally as per the instructions provided by their LDAP
administrator.
Make sure that the new password follows the password rules:
Password must contain at least:
• One lowercase letter
• One uppercase letter
• One number
• One special character
1. From the User Menu on the Acquisition screen, select Change Password.
The Change Password dialog box opens.
2. Enter the current password and new password, and confirm the new password.
3. Select Change Password.
• If the new password meets the password requirements, a message displays
that your password was changed successfully.
Select OK to close the Change Password window. You are logged into the
device.
• If the new password does not meet the password requirements, an error
message displays.
Follow the password rules for a new password and repeat the steps in this
procedure to create a new password.
Activate or Deactivate Privacy Mode
Privacy mode can be activated to prevent the display of confidential information
on the screen. During this mode, the screen will be blank. Processes such as ECG
acquisition, transmission, and printing continue to work in background, but the device
ignores input from a barcode reader.
44  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 5864335-001-1