Product Overview
Item Option Description
3 Service Displays the Service screen used to service the device. Your administrator
must grant you privileges to access this screen.
If the user does not have access to the screen and if user authentication
is disabled or configured with Technician ID access, the Default user is
prompted to log on as a user with sufficient privileges.
4 Service
Snapshot
The user can get a service snapshot without the Service privileges.
Complete the snapshot to help identify a problem on the device.
5 Change
Password
The Admin user or a local user can change their password. Displays only if
you enable full user authentication.
6 Lock Locks the device. Displays only if you enable full user authentication.
7 Log Out Logs off the user. Displays only when you are logged on to the device.
8 Standby Puts the device in standby mode to save battery power without turning it
off.
9 Power Off Powers off the device.
NOTE:
Pressing the Power button on the front panel can also stop the device.
10 About Displays the device software information.
11 Help Displays help information about the device.
Battery Status
The battery icon shows the stored power of the battery. The power levels are shown
in 10% increments. The color of the icons change to show the level of battery life.
You can operate the device connected to the AC Mains power when the batteries
are removed. The device can also operate with a single battery installed to allow hot
swapping of the battery without plugging into AC Power.
Table 3: Examples of Battery and Power Icon Status
Icon Status Description
Green Connected to AC
Mains
The device is connected to the AC Mains power and the
battery is charging.
White Operating on
Battery
The device is only using the battery and the battery is
discharging. The device is not connected to the AC Mains
power.
18  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 5864335-001-1
To Next Page
Loading...
Need help?
General
