GE MAC 5 A4 User Manual

Login and Security
Symptom Cause Solution
• You do not belong to any
groups authorized access to
this device.
• Contact your LDAP
administrator to assign your
user profile to an LDAP group
authorized for this device and
log on to the device again.
• Your current password has
expired.
• Contact your LDAP
administrator to change your
password.
You are prompted
to change your
password.
You are a local or Admin user and
your password has expired.
Perform the procedure Change
the User Password on page 44
and log on to the device again.
Log On the Device as a STAT User
If you enable user authentication STAT, a STAT user can log on to the device to get a
patient ECG in an emergency.
1. On the Login screen, select STAT.
The Acquisition screen opens.
2. You can get an ECG or other tasks the administrator has assigned to the STAT
user role. You are not able to review any report generated by other users.
Access the Device using a Technician ID
Make sure that you enable the user authentication.
1. On the Login screen, enter a valid Technician ID to populate the Technician ID
field.
2. Select Continue.
You are logged on as the Default User. The Acquisition screen displays. You can
perform tasks with Default User or Technician ID assigned privileges.
Log Out of the Device
Log out of your user session when you are done using the device. You must enable
User authentication.
1. Complete pending tasks, for example, acquire an ECG or save configuration
settings, before you log off from your user session.
2. Perform one of these steps to log off of the device:
• Press the Power button. The Power Options dialog box opens. Select Log Out.
• From the User Menu on the Acquisition screen, select Log Out to log off the
device.
5864335-001-1  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 43

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English