Login and Security
3
Login and Security
Power On the ECG Device
1. Press the Power button on the front panel for a few seconds to start the device.
The device is powered on. The Power on LED on the front panel is green.
A notification message displays, if it is configured by the administrator.
2. Click Accept.
• If user authentication is enabled, you are prompted to log on to the device.
• If user authentication is disabled, you are automatically logged on to the
device as the Default User.
• If the user authentication mode is Technician ID, enter the Technician ID to
log on as a Default User.
Power Off the ECG Device
1. Before you Power Off the device, complete pending tasks, for example, acquire
an ECG and save configuration settings.
2. Do one of these steps to remove power from the ECG device:
a) From the User Menu on the screen, select Power Off.
The Power off window opens and displays a message. Select Power Off.
The device is off. The Power on LED on the front panel is off.
b) Press the Power button on the front panel for a few seconds:
The Power Options window opens with Cancel, Standby, Log Out, Privacy,
and Power Off options. Select Power Off.
5864335-001-1  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 39
To Next Page
Loading...
Need help?
General
