Work with the Queue List
1. From the Acquisition screen, select Queue.
The Queue collapsed list opens.
2. To open the Queue expanded list, select the Expand icon:
The Queue expanded list opens.
3. Select the Collapse icon to collapse the list and return to the Acquisition screen:
Delete Jobs from the Queue
1. From the Acquisition screen, select Queue.
The Queue collapsed list opens.
2. To display an expanded list of the Queue, select the Expand icon:
The Queue expanded list opens.
3. Select the transmission or network printing job you want to delete.
4. Select the Delete icon to delete the selected jobs:
• If the job status is In Progress, a message displays indicating that the job is in
progress and cannot be deleted.
You cannot delete the job. Wait until the transmission attempt completes and
then try again, if necessary.
• If the job is in Not Sent or Failed status, a message displays asking you to
confirm the deletion of the selected job.
5. Select Delete to confirm the deletion.
The selected jobs are deleted from the Queue. The patient report remains in the
Files list. You can transmit the patient report to a destination again, if required.
Retry Transmission of a Patient Report
Make sure that you have the privilege to transmit Rhythm, Full Disclosure, or ECG
patient reports to a configured destination.
122  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 5864335-001-1
To Next Page
Loading...
Need help?
General
