GE MAC 5 A4

Configure Settings
Table 53: Configure Transmission Modes
Field Action Description
Default Enable or disable
this setting.
If this setting is enabled, all generated patient reports
are sent to this destination by default.
A destination can be both the default and automatic
destination.
Default value: Disabled
Auto Enable or disable
this setting.
If this setting is enabled, all generated patient reports
are automatically sent to this destination.
A destination can be both the default and automatic
destination.
Default value: Disabled
NOTE:
When Auto is enabled for transmission and user
does not have Transmit Report privilege, the
report will not be transmitted.
NOTE:
You can configure only one transmission mode at a time.
3. Select Save.
Configure Network Printer
To configure a network printer, make sure the NETP - Network Printer option is
purchased and enabled in the Option Manager.
1. Select Settings > Workflow > Network Printer.
The network printer setting screen displays.
User Interface on A4 and A5 devices
5864335-001-1  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 183