Patient Information
• Attach an order, see Work with Orders on page 94.
• Use a software keyboard, see Enter or Edit Patient Information Using the Software
Keyboard on page 59.
Update Patient Information with a Barcode Reader
Using a barcode reader can simplify the entry of patient information and reduce
the chance of introducing errors. When you scan a patient’s barcode, it retrieves
the patient information encoded in the barcode. You can then verify and modify the
information.
You can scan a patient's barcode using an external barcode reader.
Before you use an external barcode reader, make sure that:
• The BRCD option to use an external barcode reader is activated on the device.
• The barcode reader is connected to the device, and the device is correctly
configured to use the peripheral. For more information, see Update Patient
Information with a Barcode Reader on page 52.
• You are in the Live or Full Disclosure ECG screen, or when patient demographics
banner is open.
An error message displays if you scan a barcode during the acquisition of a Resting
ECG, Rhythm ECG or a Full Disclosure ECG for the patient.
Use the procedure below to scan the patient’s barcode:
1. Start a test for a new patient. For more information, see Start a Test for a New
Patient on page 51.
2. Scan the patient’s barcode to populate the Patient Information screen.
Hold the button and position the barcode reader 10 cm to 15 cm (4 inches to 6
inches) above the barcode to be scanned.
The barcode is automatically scanned.
The barcode reader emits a sound to confirm the barcode scan. The Patient
Information screen expands and displays the fields populated with patient
information.
3. If there is a mismatch between the data scanned from the barcode and existing
patient information, a message displays. Perform one of the steps as follows:
52  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 5864335-001-1
To Next Page
Loading...
Need help?
General
