GE MAC 5 A4 User Manual

Login and Security
1. Do one of these steps:
• If the device is shutdown, power on the device. See Power On the ECG Device
on page 39.
• If the device is locked, unlock the device. See Unlock the Device on page 45.
The Login screen displays.
2. Enter your username and password.
• If you are an LDAP user and the default domain name is not configured, or
your user profile is part of an LDAP server domain which is not the default
domain, enter the domain name and username. For example, Domain
\Username.
• To verify that you entered the correct password, select Show to view the
password.
• Contact your administrator to reset your password. Log on to the device using
the new password. Change the password immediately for security reasons.
• If you are the Admin user and forgot your password, perform a system
reset to reset the password to the default password admin123. For more
information, see Perform System Reset on page 46.
3. Select Log In.
• If the login credentials are correct, you are successfully logged on to the
device. Your username displays on the upper-right corner of all of the screens
you have access.
• If your login fails, see the table below:
Table 10: Login Errors
Symptom Cause Solution
You entered your username or
password incorrectly.
Re-enter your correct username
and password again.
You are a local user and you
forgot your password
Contact your administrator to
reset your password, then log on
to the device again.
If you are an LDAP user, the error
is caused by:
The username
or password is
incorrect.
• No connection to the LDAP
server. Your username
cannot be authenticated
against cached LDAP user
credentials.
• Wait for the connection
to the LDAP server to be
restored and log on to the
device again.
42  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 5864335-001-1

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English