GE MAC 5 A4 User Manual

Configure Settings
If you want to... Then...
Save the user
settings to a USB
flash drive
1. Select Save to USB.
2. Select Select All to save all the settings to USB flash drive.
3. Select specific check boxes to save the settings below to USB flash
drive:
• ECG
• Patient Data
• Workflow
• User Account
• Network
• System
• Clock and Language
• Hardware
The configuration file is saved to the root directory of the USB flash
drive, and a confirmation message displays. The configuration
file name follows the format: <product name>_<serial
number>.usrcfg.
If a previously saved file exists, a message displays asking you to
confirm overwriting the existing file. Select OK to overwrite the file,
or insert another USB flash drive to save the file.
4. Remove the USB flash drive and store it carefully for future use.
Restore the user
settings from a USB
flash drive
NOTE:
You can restore user settings only if you previously saved the
settings to the USB flash drive.
1. Select Restore from USB.
If there are multiple configuration files in the USB flash drive,
select the correct file.
2. Select the configuration file and proceed.
A message displays indicating that this action will log off the
device.
3. Select Yes to confirm the action.
The settings are successfully restored from the selected file in
the USB flash drive, and the system logs off.
If there are problems with the USB flash drive or the user configuration file, the
configuration is not successfully saved or restored.
To resolve errors related to the user configuration file, see Configuration File
Errors on page 282.
To resolve errors related to the USB flash drive, see USB Flash Drive Errors on
page 282.
5864335-001-1  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 251

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English