Configure Settings
Field Action Description
Date Click anywhere on the Date field to populate the Calendar.
Select the date from the Calendar.
Select Save.
If you select Cancel, the calendar closes and your changes are not applied.
The Restore to Factory Defaults procedure does not change the date.
Default value: Date set at factory
Time Enter the current
time.
• If the Use 24-hour Format setting is disabled, you
can configure the hour from 1 to 12 and set AM or
PM.
• If the Use 24-hour Format setting is enabled,
you can configure the hour from 0 to 23 with no
selection for AM or PM.
The Restore to Factory Defaults procedure does not
change the time format.
Default value: Time set at factory
Allowed values:
HH:MM:SS, where:
• HH = hour
• MM = minutes
• SS = seconds
AM or PM Enable or disable
this setting.
If the Use 24-hour Format setting is disabled, select AM
or PM.
This setting is not available if the Use 24-hour Format is
enabled.
This setting is automatically enabled when the device
language is set as English, and the device is restored to
factory defaults settings.
Use 24-hour
Format
Configure the
time format for
the device.
• If this setting is disabled, you can configure the hour
from 1 to 12 and set AM or PM.
• If this setting is enabled, you can configure the hour
from 0 to 23 with no selection for AM or PM.
This setting is automatically enabled when the device
language is set as Chinese, Danish, Dutch, Finnish,
French, German, Italian, Swedish, or Norwegian, and
the device is restored to factory defaults settings.
This setting is automatically disabled when the device
language is set as English, and the device is restored to
factory defaults settings.
Set Time Zone Select the time
zone for the
device.
Default value: UTC (Coordinated Universal Time)
Allowed values: List of time zones representing all areas
of the world.
5864335-001-1  MAC
â„¢
5 A4/MAC
â„¢
5 A5/MAC
â„¢
5 Lite 257
To Next Page
Loading...
Need help?
General
