GRASS VALLEY KAYENNE - V2.0 User Manual

100 KAYENNE — User Manual
Section 3 — System Operation
Function and Delegation Buttons
The following describes the function and delegation buttons (Figure 76):
• Hold button—Sets a bus hold on the delegated row.
• ME bus select buttons—
K1-K6, A, B, U1, and U2 in columns 2-4, pressing
one of these buttons delegates that bus.
•
Macro select button—Delegates rows 1 and 2 of a Source Module to
macros.
Note To delegate one row, hold down the Macro button and press a bus delegation
button or hold down the bus delegation row button and press the Macro
button.
• Key Split button—Creates a split key when a source is selected for the fill
signal, the
Key Split button is held down, and a source is selected on a
row delegated to the key bus.
•
Far button—The Far modifier is used for DPM rotation transitions.
During DPM operations, the side that is seen by the user is defined as
the ‘near side’. To set the far side for the current delegation of a bus,
press and hold the
Far button (and shift button if necessary) and make
a source selection for that side.
•
Aux select button—Delegates Rows 1 and 2 of a Source Module to Aux
bus control.
•
Router select button—Delegates Rows 1 and 2 of a Source Module to
Router selection.
•
Rules Hold button—When pressed (toggle), Source Rules are not applied
to that Source Module.
•
E-MEM select button—Delegates rows 1 and 2 of a Source Module to
E-MEMs.

GRASS VALLEY KAYENNE - V2.0 Specifications

General

Brand	GRASS VALLEY
Model	KAYENNE - V2.0
Category	Recording Equipment
Language	English