KAYENNE — User Manual 133
Button Mapping
User Colors:
The User Color buttons allow you to create custom colors for sources
(
Figure 97). You can change the button color for one source or several using
the Multi-Select button for each button (1-5).
Figure 97. Source Colors Menu—User Colors
1. Touch User Setups, Panel Pref to go to the Source Colors menu (Figure 96).
2. Touch a User Colors button User 1-User 5.
3. Adjust the User Color using the Red, Blue, Green data pads
(
Figure 96, right).
4. Select the Logical ID of the desired source (use Multi-Select button for
multiple selections).
For User-defined colors, see the User Color pane located below the User
Colors buttons when adjusting color with the data pads or soft knobs.
User-defined colors can be saved as part of a Show file.
To Next Page
Loading...
