KAYENNE — User Manual81
3-D Digital Effects Concepts
Figure 60. Continuity Control Setting Zero
With continuity set to 1.0, the entry path through the keyframe is pulled
positively along the continuity vector. The effect of 1.0 continuity is that of
motion dropping into and then out of the keyframe, similar to a bouncing
ball (
Figure 60).
Figure 61. Continuity Control Setting 1.0
With continuity set to -1.0, the paths between the keyframes become
straight lines, accelerating into the keyframe and decelerating as it leaves
the keyframe (
Figure 62).
Continuity = 0.0
KF1 KF2
KF3
0721_06_50_r0
+
–
Continuity
Vector
Continuity = 1.0
KF1
KF2
KF3
+
–
Continuity
Vector
0721_06_51_r0
To Next Page
Loading...
