HBM MGCplus - Page 161

Measuring
Adapting to the transducer
MGCplus A0534-30.0 HBM: public 161
14. In the Decimal places edit field enter the desired number of decimal
places and confirm with
.
15. In the Step selection field select the desired step and confirm with
.
Information
The step refers to the last decimal place of the display value.
Example:
Entry 1000.0 rpm
 Step 1 means display jumps every 0.1rpm
 Step 5 means display jumps every 0.5rpm
Entry 1000.000 rpm
 Step 1 means display jumps every 0.001rpm
 Step 5 means display jumps every 0.005rpm
16. Use the Switch key
to go to measuring mode and confirm the con
firmation prompt with
.