HBM MGCplus - Page 201

Additional functions
Limit value combination (single-channel modules only)
MGCplus A0534-30.0 HBM: public 201
With the settings in this example, the following display is produced when
limit value 1 is undershot (image type "2 limit value status"):
1−ML30 Gross 8.483 kN
1−LV1 Below 10kN
1−LV2 Below 20kN
1−LV3 NOK
LIMIT VALUE
Measure
Limit value output
Combination:
Input signal 1:
Input signal 2:
Input signal 3:
Input signal 4:
LIMIT VALUE COMBINATION CHANNEL 1
Limit value 1 
Limit value 2 
−−−
−−−
3
AND 