System
Save/load
244 A0534-30.0 HBM: public MGCplus
Save parameters
1. Use the Switch key
to switch to Setup mode
2. Print
3. In the pull‐up menu select Save/ and confirm with .
You will then be in the Save/ settings setup window.
4. Use
to select the Save button and confirm with .
5. In the Param.set activation field, under the channel number, enter the
parameter set for which you want to save the settings and confirm with
.
6. Use
to select the OK button symbol and confirm with .
To return to measuring mode, press the Switch key
and confirm the
confirmation prompt with
.
To Next Page
Loading...
