Hioki IM3536 - Page 149

143
Saving Measurement Data
Procedures
Screen display method (For more information, see p. 29.):
(Measurement screen) FILE key>(FILE screen) SET tab
1
Insert the USB ash drive into the front
USB connector (p. 138).
2
Touch the TYPE key.
3
Touch the TEXT ON key and then touch
the EXIT key.
4
Set the header, delimiter, and quotation
mark character.
DATE Sets whether to use the save date
and time as the header (p. 144).
SET Sets whether to use the measure-
ment condition as the header
(p. 145).
PARA Sets whether to use the save
measurement parameters as the
header
(p. 146).
DELIM Sets the delimiter type. (p. 148)
QUOTE Sets the quotation mark character.
(p. 149)
5
Touch the EXIT key.
Displays the measurement screen.
6
Touch the SAVE key.
The measurement data will be saved.
• Touching SAVE automatically creates a folder on the USB ash drive and saves the le there.
The date is used for the name of the folder created when you press SAVE key.
Example: Saved on September 30, 2014 → 20140930
• "To specify the save folder" (p. 152)
• A lename will be assigned automatically based on the date and time.
(Example: Saved at 16:31:44 on September 30, 2014 → 140930163144.csv)
8
Using USB Flash Drive (Saving and Loading Data)