Hologic Panther System - Page 311

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
284
Appendix B. Processing Flags
Code Description Outcome
ash Invalid kinetic profile.
The slope value for the
flasher analyte curve is
greater than the
maximum cutoff for the
assay.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
asl Invalid kinetic profile.
The slope value for the
glower analyte is less
than the minimum cutoff
for the assay.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
b Invalid kinetic profile.
The curve shape for the
glower analyte is
invalid.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
bcin Invalid fluorescent curve
profile. Control value
falls outside specified
limits.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
brl Invalid kinetic profile.
The glower analyte
curve R squared value
is less than the
minimum cutoff value for
the assay.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
bsh Invalid kinetic profile.
The slope value for the
glower analyte curve is
greater than the
maximum cutoff value
for the assay.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
bsl Invalid kinetic profile.
The slope for the glower
analyte curve is less
than the minimum cutoff
value for the assay.
Sample is invalid.
Check all fluid connections. Contact Hologic
Technical Support.
Table 117. Results Processing Flags (Continued)