Modbus Read, Write and Override Parameters plus Exception Codes
3/07 UDC3500 Universal Digital Controller Product Manual 357
Refer to Table 10-9 for the codes to display or change any of the parameters associated
with the computer setpoint on Loop 2.
Table 10-9 Computer Setpoint Associated Parameters for Loop2
Parameter
Register Address
Description ID
Hex Decimal
Setpoint Limits 7,8 0107, 0108 263, 264
Local Setpoint #1 39 0127 295
Local Setpoint #2 53 0135 309
Local Setpoint #3 116 0174 372
Local Setpoint #4 112 0170 368
Local Setpoint Selection 173 01AD 429
Computer Setpoint Ratio 90 015A 346
Computer Setpoint Bias 91 015B 347
Shed Timer Reset 127 017F 383
To Next Page
Loading...
