2.1.4.2.4 Viewing the backup power source status
2.1.4.2.5 Managing power settings
2.1.4.3 Configure arrays
2.1.4.3.1 Creating an array using UEFI System Utilities
2.1.4.3.2 Viewing logical drive properties
2.1.4.3.3 Creating a logical drive
2.1.4.3.4 Assigning spare drives
2.1.4.3.5 Deleting a spare drive
2.1.4.3.6 Identifying a device
2.1.4.3.7 Deleting an array
2.1.4.3.8 Editing a logical drive
2.1.4.3.9 Deleting a logical drive
2.1.4.4 Disk Utilities
2.1.4.4.1 Viewing disk device information
2.1.4.4.2 Identifying a disk device
2.1.4.5 Setting bootable devices for Legacy Boot Mode
2.1.4.5.1 Setting the primary and secondary bootable devices (Legacy Boot Mode)
2.1.4.5.2 Setting the number of OS bootable drives (Legacy Boot Mode)
2.1.4.6 Viewing and configuring NIC and FCoE settings
2.2 One-Time Boot Menu
2.2.1 One-Time Boot Menu options
2.2.2 Selecting an option for a one-time boot
2.3 Embedded Applications
2.3.1 Launching the Embedded UEFI Shell
2.3.2 Viewing or clearing the Integrated Management Log
2.3.3 Downloading Active System Health data
2.3.4 Downloading an Active Health System Log
2.3.5 Logging in to Active Health System Viewer
2.3.6 Uploading an AHS log to AHSV
2.3.6.1 Embedded Diagnostics
2.3.7 Launching Embedded Diagnostics
2.3.8 Launching Intelligent Provisioning
2.3.9 Launching Embedded iPXE
2.4 System Information and System Health
2.4.1 System Information
2.4.2 Viewing System Information
2.4.3 Viewing System Health
2.5 Rebooting the system, selecting a language, and setting the browser mode
2.5.1 Rebooting the system
2.5.1.1 Exiting and resuming system boot
2.5.1.2 Rebooting the system
2.5.2 Selecting a language and browser mode
2.5.2.1 Selecting a system language
2.5.2.2 Selecting a browser mode
To Next Page
Loading...
