92
FTP commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
FTP is not supported in FIPS mode.
FTP server commands
display ftp-server
Use display ftp-server to display FTP server configuration and status information.
Syntax
display ftp-server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running.
User count: 1
Idle-timeout timer (in minutes): 30
Table 14 Command output
Field Description
User count Number of the current logged-in users.
Idle-timeout timer (in minutes)
If no packet is exchanged between the FTP server and client during
this period, the FTP connection is closed.
Related commands
ftp server enable
ftp timeout
display ftp-user
Use display ftp-user to display detailed information about online FTP users.
Syntax
display ftp-user
To Next Page
Loading...
Need help?
General