168
#
<Sysname>
The output shows that VLAN 200 is contained in both configurations, VLAN 400 and VLAN 500 are
contained only in the running configuration, and VLAN 300 is contained only in the next-startup
configuration.
For the command output description, see Table 23.
Related commands
display current-configuration
display current-configuration diff
display saved-configuration
display saved-configuration
Use display saved-configuration to display the contents of the configuration file for the next
system startup.
Syntax
display saved-configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify that important settings have been saved to the configuration file for the
next system startup.
This command selects the configuration file to display in the following order:
1. If the main startup configuration file is available, this command displays the contents of the main
startup configuration file.
2. If only the backup startup configuration file is available, this command displays the contents of
the backup file.
3. If both the main and backup startup configuration files are not available, this command does not
display anything.
Examples
# Display the contents of the configuration file for the next system startup.
<Sysname> display saved-configuration
#
version 7.1.070, Release 1201
#
sysname Sysname
#
ftp server enable
#
telnet server enable
#
domain default enable system
To Next Page
Loading...
